To prevent burning or malfunction due to getting wet

Be sure to clean after use

Charging with liquid such as water or sweat or foreign objects such as dust attached to the USB Type-C port of the charging case or charging port of the headset may cause an accident such as burns or serious wounds due to fire, electrocution, heat generation, smoke, or ignition. It may also cause a malfunction.


Avoid the following situations and be careful not to get moisture or dirt on the headset units or charging case.

If the headset units or charging case gets wet or dirty, see “When the headset units or charging case gets wet” and clean them as described before use.

  • Touching the headset units or charging case without wiping your wet hands after doing housework in a kitchen or washing your hands in a washroom.

  • Putting the headset units or charging case in the chest pocket of a damp article of clothing.

  • Putting the headset units or charging case in a bag with a cold PET bottle.

  • Spilling a drink while eating or drinking.

To protect the headset units and charging case from being damaged

Carefully note the precautions below to ensure proper use of the headset.

  • Do not splash water forcibly into the sound output parts, air holes, or microphone parts of the headset units.
  • Do not allow the headset to remain wet in a cold environment, as the water may freeze. To prevent malfunction, make sure to wipe off any water after use.
  • Do not place the headset in water or use it in a humid place such as a bathroom.
  • If the headset gets wet,

    1. Use a soft dry cloth to wipe off any water that gets on the headset.

    2. Remove the earbud tips, turn the sound conduits (sound output tubes) downward, and shake several times to get the water out.

    3. Turn the microphone part or air hole part downward and gently tap it about 20 times on a dry cloth, etc. to remove any water collected inside.

    4. Leave the headset to dry in room temperature.

  • If the headset units and charging case are charged while they are wet with sweat, etc., the charging ports will corrode. Before charging, wipe off any moisture with a soft dry cloth and leave to dry in room temperature.
    Repairs in case of a malfunction without care are not covered by the free warranty.

  • Do not wash pants or shirts with the headset units left in the pockets.

  • If the headset is cracked or deformed, refrain from using the headset near water, or contact your nearest Sony dealer.